To apply GoPro adhesive mounts please follow these 3 steps: Apply the mount to a smooth, and fully cleaned surface. A textured surface or any imperfections to a smooth surface can keep the adhesive from making a strong bond. Firmly press the mount into place ensuring full contact over the entire surface area. Be sure to apply the mount at room temp, and also allow at least 24 hours for the mount to properly adhere to the surface. To remove the adhesive mounts, you can use a hairdryer or heat gun...
Read More »
The white rubber part is a locking plug that can be inserted in between the arm ends of the quick release buckle. Having the rubber plug inserted prevents any accidental release of the quick release buckle, and also tightens up the fit. The looped end of the plug can be attached to the thumbscrew to keep it secure when not locked into place. If you do not have a quick-release anti-vibration locking plug, you can get one by purchasing the Grab Bag of Mounts.
Here are instructions to swap out your housing doors on your camera's polycarbonate housing: 1. Open the backdoor of the housing so that it is hanging downwards as much as possible. 2. Pull downwards on the backdoor until it snaps free from the hinge. 3. Line up replacement backdoor into the hinge opening. 4. Push upwards on the backdoor until it clicks into place.
Check out the below Suction Cup Mount tutorial videos for complete mounting instructions. There are two tutorials here - the first is for the new Suction Cup Mount, and the second is for the old Suction Cup Mount. You can tell the difference between the old and new Suction Cup Mounts by how you lock the them in place. With the new mount, you rotate the lever down so that it's in a horizontal position to lock it in place. The old mount requires you to rotate the lever up so...
Read More »
Check out this tutorial video on how to use the HERO3 and HERO3+ Wrist Housing.
Check out the below Roll Bar Mount tutorial video for complete mounting instructions.
We do not sell extra adhesive 3M tape individually, but you can do an online search for the adhesive 3M part number to see if you can locate a retailer with the part. The part is the 2.5 mm Double Sided Tape and the 3M part number is 3M 4991 VHB.
If you are interested in viewing any of our GoPro tutorial videos, you can check them out in our GoPro Tutorial Playlists below. We have several kind of videos to check out including: Videos explaining new products and key new product features. Videos describing various accessories such as mounts or housings. GoPro Athlete Tips & Tricks. Fall 2014 Camera Lineup Check out this article for a video tutorial on the new cameras: Fall 2014 Camera Lineup. GoPro Tips and Tricks Series GoPro Product Stories We also have some GoPro Support...
Read More »
The rubber locking plug and the camera tethers are useful tools to reduce vibration and secure your camera while shooting videos or photos. Watch a demonstration of how to use these two accessories below. MusicBroke for Free "My Always Mood"Check out: http://brokeforfree.com/ The Rubber Locking Plug comes with all GoPro Cameras and the GoPro Grab Bag of Mounts. The camera tether comes with the SurfBoard Mount, the Floaty Backdoor, the Grab Bag of Mounts, and the Camera Tethers package. The Rubber Locking Plug is compatible with the GoPro Quick Release Buckle and helps...
Read More »
If you want to check your GoPro Order Status, we have a tool that will allow you to do that. GoPro Order Status If you enter your info in the tool linked above you will see all the details about your GoPro order, including its status and tracking information.